Difference between revisions of "Manually installing DejaOffice for BlackBerry Playbook and BlackBerry 10"

From CompanionLink Support
Jump to: navigation, search
 
Line 5: Line 5:
  
  
−
'''1.''' Download and install the program ‘DDPB’ to your Windows PC from this link:
+
===Install DejaHub to your BlackBerry 10 device===
−
:http://apps.goodereader.com/wp-content/plugins/download-monitor/download.php?id=177
+
These instructions will help you manually install DejaHub onto your BlackBerry 10 device:
−
:(This program lets you install BAR files to your Playbook or BlackBerry 10 device)
 
  
−
 
+
#[[http://apps.goodereader.com/wp-content/plugins/download-monitor/download.php?id=177 Click here]] to download DDPB, a program that allows you to directly install applications to your Playbook/BlackBerry 10
−
'''2.''' On your PlayBook or BlackBerry 10 device:
+
#[[http://www.dejaoffice.com/blackberryapp/DejaHub.bar Click Here]] to download the DejaHub application to your PC.
−
:- Open the Settings menu > Security > Development Mode.
+
#After DejaHub (or DejaOffice) is finished downloading, drag it to your desktop - You should now see DejaHub.bar on your desktop
−
:- Turn Development Mode ‘On’.
+
#*If you don't see file extensions, you can turn them on in Windows Control Panel > Folders > View and uncheck hide file extensions for known file types
−
:- Configure a password for the device.
+
#*If the file extension is .zip, please rename the file extension to .bar before unzipping
−
:- Note the IP address listed here (for step #4).
+
#Turn on developer options for your BlackBerry 10 device (Settings > Security and Privacy > Development Mode = On)
−
 
+
#Open the DDPB program on your computer
−
 
+
#Plug your BB10 into the PC using a USB cable
−
'''3.''' Download the following file: [http://www.dejaoffice.com/blackberryapp/DejaOfficeBB.bar DejaOfficeBB.bar] – Remember where you save this file.
+
#Press Scan in DDPB
−
 
+
#Select your BB10's IP address then press Select
−
 
+
#Enter your BB10's password into DDPB
−
'''4.''' Connect the PlayBook or BlackBerry 10 device to the PC using the USB cable and open the DDPB program:
+
#Press Connect — DDPB should now read Connected
−
:- The program should automatically detect the device. It if doesn’t, click on ‘Scan’ to find the correct IP address. You will also need to enter the password you configured in Step #2.
+
#Click Add
−
:- At the top of the DDPB program, click on Add & navigate to the DejaOffice file you downloaded in Step #3.
+
#Select the DejaHub.bar file from your desktop and press open — DejaHub.bar should now be visible within DDPB
−
:- Click to select the DejaOffice file
+
#Press Install — After the installation completes you should see a message reading Done
−
:- Click on ‘Install’ at the bottom of the program.  
 
−
 
 
−
 
 
−
'''5.''' When the application is finished installing, click on ‘Done’  - and disconnect the device. '''You’re ready to use DejaOffice!'''
 

Latest revision as of 15:39, 20 May 2013

These directions show you how to manually install DejaOffice (also known as sideloading) onto your PlayBook or BlackBerry 10 device. You’ll first save DejaOffice to your computer, then use another application to install it onto your device.


NOTE: DejaOffice is now available in BlackBerry World. Manual installation is no longer required!


Install DejaHub to your BlackBerry 10 device

These instructions will help you manually install DejaHub onto your BlackBerry 10 device:

  1. [Click here] to download DDPB, a program that allows you to directly install applications to your Playbook/BlackBerry 10
  2. [Click Here] to download the DejaHub application to your PC.
  3. After DejaHub (or DejaOffice) is finished downloading, drag it to your desktop - You should now see DejaHub.bar on your desktop
    • If you don't see file extensions, you can turn them on in Windows Control Panel > Folders > View and uncheck hide file extensions for known file types
    • If the file extension is .zip, please rename the file extension to .bar before unzipping
  4. Turn on developer options for your BlackBerry 10 device (Settings > Security and Privacy > Development Mode = On)
  5. Open the DDPB program on your computer
  6. Plug your BB10 into the PC using a USB cable
  7. Press Scan in DDPB
  8. Select your BB10's IP address then press Select
  9. Enter your BB10's password into DDPB
  10. Press Connect — DDPB should now read Connected
  11. Click Add
  12. Select the DejaHub.bar file from your desktop and press open — DejaHub.bar should now be visible within DDPB
  13. Press Install — After the installation completes you should see a message reading Done
Retrieved from "https://www.companionlink.com/support/wiki/index.php?title=Manually_installing_DejaOffice_for_BlackBerry_Playbook_and_BlackBerry_10&oldid=4879"